|
Residential Structural Certifications
& Environmental Testing |
Central Air Systems Inspections
back to Climate Systems
 |
In a typical air conditioning system, a
refrigerant circulates through a loop of copper tubing that runs between an
outdoor coil (the condenser) and an indoor coil (the evaporator). Refrigerant travels between the two coils, absorbing heat from the room and releasing it outside. In the process, the refrigerant cools the evaporator coils. A blower sends the chilled and dehumidified air into the room. The cooling effect causes the warm air to release its moisture, which drops into a drain pan and is carried away. A heat pump works just like an air conditioner but has a valve that can be reversed to deliver heat (instead of cooled air) to the house. |
|
Central air conditioning is often combined
with a forced-air furnace—both share the same blower and ductwork The
furnace's air filter removes dust, hair, and lint and should be checked
every month when air conditioning or heating are in use to be sure it is
clean. Air conditioners are powered by electricity, and they can use a lot
of it, depending on the size of the house and its general
weather-tightness. Proper maintenance and service can help reduce the high
cost of keeping your house cool. |
|
